Volvo Forums banner
1 - 1 of 1 Posts

· Registered
1 Posts
Discussion Starter · #1 ·
Hello all! New to the forums trying to sort out my 67 122s wagon's vacuum leak. The engine was recently rebuilt and now I can't get it to idle down even with the curb idle screws all the way out. I've narrowed the problem to the PCV system on the driver side of the block. If I plug that port at the manifold it idles down and dies. I replaced the lines from the manifold to the filter and to the brake booster and still it idles too high. Any ideas? Thanks in advance.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.