Volvo Forums - Volvo Enthusiast Forum - Volvo Community - Volvo Repair banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
hi every body.

How can i use cylinder balancing in VCADS PRO for VOLVO FH & FM and other VOLVO trucks (not cylinder balancing test) ?
I tested whit cylinder balancing test and for example cylinder 2 is pumping 13% more fuel.

How can i reduce that 13% more fule pumping.
I know that the EUI dont have any technical and mechanical problem.

Thanks every body
 

·
Registered
Joined
·
6 Posts
hi there,

you cant adjust the amount of fuel being delivered to individual cylinders using vcads pro.
sounds like you have a injector issue, carry out and injector shut of test under section 2 in vcads and check to hear a note change and this will be the suspected fault.
 
1 - 2 of 2 Posts
Top