Volvo Forums banner
1 - 10 of 10 Posts

· Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
I have a VNL 770 with a dead instrument cluster. Does any one have any knowledge of the inner workings of the left circuit board? I have done all the checks of the wiring and checked the soldering of the circuit board connectors. I think the problem lies with the +12 Ign. signal on the left board that turns on the microprocessor. Any help would be appreciated.
 

· Registered
Joined
·
5 Posts
Discussion Starter · #7 ·
Cluster repair

That is awesome! Post up pics or anything else that might help others in the future.
Sorry.I did not take any pictures as I was not sure of the out come. I had gotten to the point where I was resigned to purchasing a used replacement cluster. So i figured I had nothing to lose by taking a few things apart. The buzzer is not working but it never did since I have had the truck. If I decide to tackle it I will get the camera out and take a few pics. I sure wish someone had schematics for these circuits as it would make troubleshooting a lot easier. You would think that after Volvo was not using a particular circuit they would release it.
 

· Registered
Joined
·
1 Posts
Good morning , I had the same problem and i find online this guys , the fix it like new , i am very impressed , it is call Dashboard Instrument Cluster and they have location in Toronto Ontario as well in Florida US
Try them
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top