Volvo Forums - Volvo Enthusiast Forum - Volvo Community - Volvo Repair banner

1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hi Guys,
Am in the process of fitting a recond TD04H-13C turbo from Kinugawa. I thought fitting a new oil supply line might be a good idea but the one they supplied me has a max internal dia of about 3.5mm (1/8" for our U.S. cousins.) It also has 1 banjo with a restrictor of 1.5mm which Kinagawa say is adequate but as the original factory feed pipe has a bore of approx 8mm I'm not so sure it would supply enough oil to the bearings. Anyone been down this road? :)
 
1 - 1 of 1 Posts
Top